- Pipe Swing Hanger -
   W/ Shackle Pendulum
# SH114   - 2 3/8" O.D. pipe
# SH124   - 3 1/2" O.D. pipe

This is a galvanized Ductile Iron swing hanger, Which has a shackle pendulum with a sintered bronze bearing. The bronze is impregnated with oil. The pendulum is one inch wide and has a shackle with bolt so that there is no need for a connecting s-hook.  The two halves of the hangers are bolted together with a 12 mm carriage bolt and a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder so the bearing does not ride on the threads. It also has a lock nut. 
  #  SH114 - fits a  schedule 40 two inch pipe. 
  #  SH124 - fits a  schedule 40 three inch pipe.

    - Pipe Swing Hanger -
    W/ Standard Pendulum
 # SH115 - 2 3/8” O.D. pipe
 # SH125 - 3 1/2” O.D. pipe

Made of strong Ductile Iron and galvanized to prevent rust, these swing hangers feature an "oil-lite" bronze bearing and axle bolt, which threads into the frame with a nut for double protection and extra safety. 
  #  SH115 - fits a  schedule 40 two inch pipe. 
  #  SH125 - fits a  schedule 40 three inch pipe. 

   Stamped Galvanized Steel 
      Pipe Swing Hangers
# SH117 - 2 3/8 O.D. pipe
# SH127 - 3 1/2 O.D. pipe
# SH128 - 4 1/2 O.D. pipe
# SH129 - 5" O.D. pipe

These swing hangers feature an “oil-lite” bronze bearing and axle bolts with lock tight nuts. The stamped steel has more ability to bend, so they will not snap when torqued too tightly.

# SH-105
2 Bolt Iron swing hanger

Made of strong ductile iron and galvanized to prevent rust, These Wood Beam swing hangers feature a "oil-lite" bronze bearing and axle bolt.
Designed to be bolted directly to a wood beam.

One Bolt Wood Beam Hanger

Galvanized Steel Wood Beam Hanger our new wood beam hanger only uses one bolt. It has teeth on top of the hanger to prevent it from turning after installation. It is a very strong hanger and can be used for both residential and commercial use. It has an “oil-lite” bronze bearing and axle bolt with lock tight nut. It accepts a 12mm bolt.

Replacement Ductile Pendulum
with an oil lite bronze bearing

SH160 - Ductile Pendulum 3/4 inch Wide, For Alum. Hanger.

SH165 - Ductile Pendulum 1 inch Wide, For Ductile & Strap Steel Hangers.

CREATED BY Chiggerknob Swings LLC, Copyright ©  2004/2006 
[California Swing Products, Div. of Chiggerknob Swings LLC].
 All rights reserved. Updated 1-29-08